Postcode:
Resident:
Employed:
There are 13 courses available in Canberra for people who want to study oil and gas.
Possible job outcomes:
If you’re a qualified electrician the UEE40420 Certificate IV in Electrical - Instrumentation will qualify you for work as an Instrumentation and Control Technician. This training course is recognised all over Australia and you’ll complete your studies in less than a year. Graduate able to install, commission, calibrate and repair instrumentation and control equipment. Enquire now for the full list of study units, elective selections to suit your job role, and enrolment opportunities. Learn more.
Do you have trade experience and want to upskill into the mining sector? How about the 52892WA Advanced Diploma of Electrical and Instrumentation (E&I) Engineering in Mining? This nationally recognised diploma gives you a working knowledge of the latest electronic and instrumentation technologies used in the mining sector. The course introduces you to the theory behind electrical and IT systems while developing your technical skills in these areas. Graduate ready for high-end electrical work in mining operations. Enquire now for the list of study units, entry requirements, and upcoming course enrolment dates. Learn more.
Get started in civil construction with the RII30820 Certificate III in Civil Construction Plant Operations. This nationally recognised training course accompanies an apprenticeship and teaches you how to work safely on a civil construction site. The course covers levelling, trenches, concreting, earthworks — and you’ll also have the opportunity to learn how to operate a range of heavy vehicles (depending on your chosen electives) including backhoes, graders, dozers, and excavators. Enquire now for more information about how to enrol and where to study. Learn more.
Looking for an apprenticeship as an electrical instrumentation technician? Try the UEE31220 Certificate III in Instrumentation and Control — it’s a nationally recognised training course completed on-campus in 7-week blocks. During your studies you’ll be working with a variety of tools that calibrate, adjust and repair the instruments used in a wide range of industries. Plus you’ll be learning the fundamentals of electrotechnology equipment and circuitry. Enquire now to find out your eligibility for this course, as well as funding possibilities, and career outcomes. Learn more.
The 52883WA Advanced Diploma of Applied Electrical Engineering (Electrical Systems) is a hands-on engineering course that qualifies you for technical and project roles that involve instrumentation, electronics, and electrical power systems. This nationally recognised diploma delivers a full range of electrical engineering skills that will help you standout in the global market. The course covers: mathematics in engineering, electrical circuits, electrical power distribution, earthing and surge protection, electrical safety and wiring systems, energy use and efficiency, power quality, power cables and accessories, professional engineering practice, and much more. Enquire now for entry requirements, electrical engineering career outcomes, and the latest enrolment opportunities. Learn more.
Graduates of the Doctor of Engineering (DEng) will be able to make original and significant contributions to the development, application, and evaluation of professional knowledge by engaging with practical problems of demonstrated importance to their employment context and the wider body of engineering and technical knowledge. Learn more.
Work at factories and processing plants as a qualified plant technician with the Certificate IV in Process Plant Technology (PMA40116). This nationally recognised training course is completed in the classroom and formalises your existing knowledge of processing plant operations. The course covers work health and safety, carrying out machine shutdowns and isolation, using computerised technology and data systems, plus optimising processing plant operations. Choose electives that support your actual job role: monitoring and controlling work permits, leadership and job-coaching, preventative maintenance, remote operations.Enquire now for the full list of electives and the next intake dates. Learn more.
Become a mechanical fitter and machinist with the MEM30219 Certificate III in Engineering - Mechanical Trade (Fitting/Machining Trade). This nationally recognised qualification is part of an engineering trade apprenticeship and is delivered under the guidance of a qualified tradesperson. During your studies you’ll gain the foundational skills of engineering work (measurements, computations, tools, computer technologies, safety). You’ll also learn how to operate a range of machines and precision tools. Graduate a qualified tradesperson ready for work or higher education in mechanical engineering. Enquire now for the list of entry requirements, engineering career outcomes, and enrolment opportunities near you. Learn more.
Become an engineering mechanical fitter with the MEM30219 Certificate III in Engineering - Mechanical Trade (Fitting Trade). This nationally recognised qualification is part of an engineering trade apprenticeship in mechanical fitting. During your studies you’ll be working under the guidance of a qualified tradesperson, learning how to perform engineering measurements and computations, use hand and power tools, and computer technologies. You’ll also gain specialist skills in mechanical fitting: general machining, lathe operations, mechanical cutting, installing plant and machinery, precision work, overhauling mechanical equipment, and much more. Enquire now for the list of study units, apprenticeship outcomes, and available course dates. Learn more.
Become a qualified trade engineer with the MEM30219 Certificate III in Engineering - Mechanical Trade (Machining Trade). This nationally recognised qualification is part of a machinist apprenticeship. The course begins with the foundations of engineering work: measurements, computations, hand skills, computing technologies, safety and sustainability. You’ll then gain specialist machining skills under the guidance of a qualified tradesperson. Skills include: mechanical cutting, lathe operations, general machining, milling operations, grinding, precision work, assembling engineering components, and much more. Enquire now for entry requirements, trade engineering outcomes, and course availabilities near you. Learn more.
Get a production role in raw materials manufacturing with the MSM30318 Certificate III in Manufactured Mineral Products. This nationally recognised qualification will teach you how to manufacture mineral products for industry, including cement, pre-cast concrete, pre-mixed concrete, quarry and asphalt. The course covers: on the job safety and situational awareness, workplace communication, cleaning workstations and equipment, taking measurements, interpreting technical drawings, reading dials and indicators, operating production equipment, receiving and despatching goods, storing materials for production, and much more. Enquire now for the full list of study units, manufacturing career outcomes, and the latest enrolment dates. Learn more.
The Certificate III in Engineering – Mechanical Trade (MEM30219) is for trade apprentices (fitters and turners, toolmakers, metal machinists) or anyone needing an entry point into mechanical engineering. It’s a nationally recognised qualification that will teach you how to work in a manufacturing or engineering environment — performing complex measurements and working to quality standards. Enquire now for information about career outcomes and opportunities for enrolment. Learn more.
Become a trade qualified engineer with the MEM40119 Certificate IV in Engineering. This nationally recognised training course begins with basic engineering trade skills: reading technical drawings, taking engineering measurements, performing computations, working safely in engineering, planning and completing work tasks, using hand tools and computing technologies. You’ll then begin ferrous (and non-ferrous) melting and casting operations, testing foundry related materials, advanced welding to code standards, and other technical skills. Enquire now for the full list of graduation competencies, entry requirements, and upcoming enrolment dates. Learn more.
We’ll find nearby campuses and check if you’re eligible for funding in your state.
Yes, there are course providers who offer qualifications in oil and gas in Canberra. Find a course provider near you. Once you make an enquiry, a course advisor will get in touch to discuss your study options and course fees.
You can study oil and gas in Canberra through online or workplace learning. Online learning is a popular method of training as you can learn from the comfort of your own home and complete the course at your own pace. While workplace is a popular method of training as you can gain real work experience while you earn an income. Find a course provider that best suits your needs.
Potential job roles within oil and gas include apprentice engineer, engineering tradesperson, advanced engineering tradesperson or derrickman (to name a few). Browse through the job pathways table to find a role that suits your needs.
Here are some potential career pathways within oil and gas. Click on an occupation to learn more about the role and the qualifications that can help you get started in this industry.
Oil and Gas
Apprentice Engineer
$960 weekly pay
Engineering Tradesperson
Advanced Engineering Tradesperson
$1,800 weekly pay
Derrickman
$1,550 weekly pay
Electrical and Instrumentation Technician
Gas Industry Operator
$1,440 weekly pay
Hydraulic Fitter
$1,350 weekly pay
Hydraulic Mechanic
Industrial Electrician
Instrumentation Technician
$1,400 weekly pay
Machinist
Mechanical Fitter
Plant Mechanic
Plant Operator
Research Engineer
$2,300 weekly pay