Scaffolding courses in Australian Capital Territory

CPCWHS1001

Prepare To Work Safely In The Construction Industry

Get your Construction Industry White Card with the CPCWHS1001 Prepare to work safely in the construction industry. This nationally recognised short course is mandatory for anyone who routinely enters a construction site in Australia, including site managers, tradies, apprentices, surveyors, and labourers. During your studies, you will learn your WHS responsibilities and develop skills in hazard identification and risk control. The course covers: using Personal Protective Equipment (PPE), understanding safety signs, reporting hazards, incident and emergency responses, interpreting safety documents, and more. Enquire now for the full list of White Card competencies and training providers near you that offer this short course.

Career opportunities Builders Labourer Construction Labourer General Labourer View all

Duration Half day - 4 days

Study mode Blended, On Campus, Online, Traineeship

Career opportunities Builders Labourer Construction Labourer General Labourer

RII30920

Certificate III in Civil Construction

The RII30920 Certificate III in Civil Construction is a nationally recognised qualification for anyone wanting to get started in road, bridge, or tunnel construction. The course introduces you to a civil construction jobsite, teaching you the safety and environmental protocols expected of all civil construction workers. You’ll learn to read plans and jobs specs, use a range of hand and power tools, and perform accurate measurements and calculations. The qualification then allows you to specialise in any of nine areas: bituminous surfacing, bridge construction, pipe laying, road construction, road marking, tunnel construction, timber bridges, traffic management, and general operational work. Enquire now for the list of course specialisations (and their availability in your area) as well as open course dates.

Career opportunities Construction Labourer Grader Operator Pipelayer View all

Duration 12 - 36 months

Study mode Apprenticeship, On Campus, Traineeship

Career opportunities Construction Labourer Grader Operator Pipelayer

CPC30920

Certificate III in Scaffolding

The CPC30920 Certificate III in Scaffolding is a trade qualification delivered under the supervision of a qualified scaffolder. It’s a nationally recognised course and you’ll graduate with a construction industry White Card, working at heights permit, and a scaffolding licence. The course covers: measurements and calculations, reading plans and specifications, erecting and dismantling scaffolding. You can also choose electives in welding, business administration, dogging, and loading crane operations.

Career opportunities Scaffolder Apprentice Scaffolder View all

Duration 6 - 12 months

Study mode Traineeship

Career opportunities Scaffolder Apprentice Scaffolder

RII30920

Certificate III in Civil Construction (Bridge Construction and Maintenance)

Join a bridge construction and maintenance crew with the RII30920 Certificate III in Civil Construction (Bridge Construction and Maintenance). This nationally recognised qualification will teach you the communication and safety essentials of a civil construction worksite, then introduce you to the required tools, measurements and calculations. You’ll also gain hands-on skills in digging, levelling, concreting, site draining and dewatering, installing pre-cast girders and parapets, installing pre-cast concrete bridge decks, and more. This course also has scope to obtain a number of WHS permits including working at heights, rigging, dogging, and scaffolding. Enquire now for enrolment opportunities and the full list of civil construction career outcomes.

Career opportunities Construction Labourer Construction Worker Formworker View all

Duration 18 months

Study mode Traineeship

Career opportunities Construction Labourer Construction Worker Formworker

RII30920

Certificate III in Civil Construction (Civil Construction General)

Get a labouring job on a civil construction work crew with the RII30920 Certificate III in Civil Construction (Civil Construction General). This nationally recognised qualification will teach you how to use basic hand tools and construction equipment, as well as safely carry out manual work including digging, lifting, carrying, levelling, concreting, paving, road and bridge construction, traffic control, and yard maintenance. There is also scope to obtain a number of WHS permits and licences: rigging, dogging, scaffolding, working at heights, and more. Enquire now for the full list of civil construction competencies, availability of specialisation units, and upcoming enrolment dates near you.

Career opportunities Construction Labourer Concreter Grader Operator View all

Duration 30 - 36 months

Study mode Apprenticeship, Traineeship

Career opportunities Construction Labourer Concreter Grader Operator

CPCCLSF2001

Licence to Erect, Alter and Dismantle Scaffolding Basic Level

The CPCCLSF2001 Licence to Erect, Alter and Dismantle Scaffolding Advanced Level involves the skills to safely erect, alter, and dismantle scaffolding structures. It includes working with modular or pre-fabricated scaffolds, cantilevered materials hoists (with a max load of 500kg), ropes, gin wheels, safety nets, static lines, and bracket scaffolds (tank and formwork). The unit focuses on ensuring compliance with licensing requirements for scaffolding operations where falls from heights exceeding four metres could occur. Enquire now for a full list of entry requirements and available enrolment dates.

Career opportunities Scaffolder Construction Labourer Apprentice Scaffolder View all

Duration 1 day - 5 days

Study mode On Campus, Traineeship

Career opportunities Scaffolder Construction Labourer Apprentice Scaffolder

CPCCLSF3001

Licence to Erect, Alter and Dismantle Scaffolding Intermediate Level

The CPCCLSF3001 Licence to Erect, Alter and Dismantle Scaffolding Intermediate Level encompasses skills for erecting, altering, and dismantling scaffolding. Tasks include using crane-loading platforms, scaffolds, ramps, safety screens, mast climbers, and tube scaffolds. This unit ensures safe performance of scaffolding work, crucial for structures supporting platforms above four metres where falls could occur. Enquire now for a full list of entry requirements and available enrolment dates.

Career opportunities Construction Labourer Scaffolder View all

Duration 5 days

Study mode On Campus

Career opportunities Construction Labourer Scaffolder

Course providers in Australian Capital Territory

The following providers offer Scaffolding courses in Australian Capital Territory.

Provider name Access Training Centre

RTO code 40101

Courses available 3

Provider name Admire Workplace Safety

RTO code 91330

Courses available 1

Provider name Canberra Institute Of Education And Technology

RTO code 45592

Courses available 1

Provider name CEG-Training Partnerships

RTO code 40138

Courses available 2

Provider name Workforce Training Group

RTO code 46093

Courses available 1

Provider name Allies Security Services

RTO code 91298

Courses available 1

Provider name Lack Group

RTO code 45747

Courses available 1

Provider name Realistic Training Options

RTO code 32496

Courses available 1

Provider name Trade Academy Western Australia

RTO code 52719

Courses available 2

Provider name Master Builders ACT

RTO code 88163

Courses available 4

Provider name Core Training

RTO code 46001

Courses available 1

Provider name Australian Security Education & Consulting

RTO code 88065

Courses available 1

Provider name Upskill Institute

RTO code 45708

Courses available 1

Provider name Image Australian Modern Academy

RTO code 41169

Courses available 1

Provider name Australian Vocational Training

RTO code 45811

Courses available 1

Provider name Noble Training Group

RTO code 41488

Courses available 2

Provider name Gold Training

RTO code 40515

Courses available 2

Provider name Skillinvest

RTO code 4192

Courses available 1

Provider name Foundation Training Australia

RTO code 31972

Courses available 1

Provider name South Regional TAFE

RTO code 52790

Courses available 1

Provider name TAFE NSW

RTO code 90003

Courses available 2

Provider name Civil Train

RTO code 5708

Courses available 1

Provider name City-Wide Building & Training Services

RTO code 91138

Courses available 1

Provider name South Metropolitan TAFE

RTO code 52787

Courses available 1

Provider name High Skill Training

RTO code 91309

Courses available 2

Provider name Mobile Plant Operator Training Services

RTO code 91589

Courses available 1

Provider name DLI Training

RTO code 21714

Courses available 1

Provider name Train Now

RTO code 45627

Courses available 2

Provider name Shamrock Training

RTO code 45171

Courses available 1

Provider name NECA Training

RTO code 91632

Courses available 1

Career Pathfinder

Skills shortages + AI Exposure

Discover in-demand careers and understand how each role may be impacted by AI and automation.

A tool for students to:

See in-demand occupations across Australia
Check AI Exposure ratings
Compare training duration and average income

All courses

More about Scaffolding courses

If you're looking to kickstart your career in the construction industry, the Australian Capital Territory offers a range of Scaffolding courses tailored for beginners. With no prior experience or qualifications required, aspiring scaffolders can choose from a selection of valuable short courses. Among the most popular options are the Work Safely at Heights RIIWHS204E and the Prepare To Work Safely In The Construction Industry CPCWHS1001, both designed to provide essential skills for working securely at height and within the construction environment.

Additionally, for those looking to get certified in scaffolding, there are courses that lead to the Licence to Erect, Alter and Dismantle Scaffolding Intermediate Level CPCCLSF3001 and the Licence to Erect, Alter and Dismantle Scaffolding Basic Level CPCCLSF2001. These qualifications enable individuals to safely manage scaffolding operations, a crucial skill set in the region's thriving construction sector.

In the Australian Capital Territory, several training providers offer these essential courses. The MBACT delivers the Work Safely at Heights training, while Core Training offers the Prepare to Work Safely in the Construction Industry course. Studying face-to-face at these local providers ensures that students benefit from hands-on learning and direct interaction with experienced instructors, equipping them with the skills needed in the field.

Moreover, interested individuals can explore various related study areas to complement their scaffolding training. These fields include Plumbing, Electrician, and Welding, among others. By enrolling in scaffolding courses available in the Australian Capital Territory, you are taking the first step towards a rewarding career in construction. To find more details about the available courses, visit this page and start your journey today!

Courses by location

Canberra

Scaffolding Courses in Australian Capital Territory

Scaffolding courses in Australian Capital Territory