Course providers in Windsor
The HLTWHS005 Conduct Manual Tasks Safely provides the skills and knowledge necessary for employees to perform safe handling practices in the healthcare industry. Poor manual handling is a common cause of injury, making it crucial for all healthcare workers to learn safe transfer techniques. This course covers recognising hazardous manual tasks, preparing for them, and completing them safely. It is applicable to all workers involved in manual handling tasks. Enquire now for a full list of entry requirements and available enrolment dates.
Learn moreGet your Construction Industry White Card with the CPCWHS1001 Prepare to work safely in the construction industry. This nationally recognised short course is mandatory for anyone who routinely enters a construction site in Australia, including site managers, tradies, apprentices, surveyors, and labourers. During your studies, you will learn your WHS responsibilities and develop skills in hazard identification and risk control. The course covers: using Personal Protective Equipment (PPE), understanding safety signs, reporting hazards, incident and emergency responses, interpreting safety documents, and more. Enquire now for the full list of White Card competencies and training providers near you that offer this short course.
Learn moreThe SFL40115 Certificate IV in Floristry is for senior florists and team leaders who need leadership and advanced floral design skills. This nationally recognised qualification will teach you how to design and construct complex floristry products, co-ordinate floral designs for special occasions, lead work teams, order and maintain floristry stock, and provide a safe work environment. There is also scope to learn administration, eCommerce, and horticultural skills. Enquire now for the full list of study units, graduation competencies, and enrolment centres near you.
Learn moreLearn to design beautiful flower arrangements plus the essentials of floristry sales and service with the Certificate III in Floristry (SFL30115). This 6 month course can be used to support an apprenticeship in floristry or to get started in the business. It’s a nationally recognised qualification and covers: floristry tools and equipment, hand-tied and wired floristry products, flower and plant materials, design and colour fundamentals, sales and merchandising.Enquire now for a list of course dates and the next opportunities for enrolment.
Learn moreThe Certificate II in Floristry (Assistant) (SFL20115) will teach you how to create beautiful flower arrangements ready for sale. This nationally recognised qualification will get you started in a florist shop receiving, storing, and caring for floristry stock, while interacting with customers. The course will teach you how to recognise flower and plant materials, assemble different types of floristry products, and use correct tools and equipment. Enquire now for the full list of study units, graduation outcomes, and upcoming enrolment dates.
Learn moreThe RII30920 Certificate III in Civil Construction is a nationally recognised qualification for anyone wanting to get started in road, bridge, or tunnel construction. The course introduces you to a civil construction jobsite, teaching you the safety and environmental protocols expected of all civil construction workers. You’ll learn to read plans and jobs specs, use a range of hand and power tools, and perform accurate measurements and calculations. The qualification then allows you to specialise in any of nine areas: bituminous surfacing, bridge construction, pipe laying, road construction, road marking, tunnel construction, timber bridges, traffic management, and general operational work. Enquire now for the list of course specialisations (and their availability in your area) as well as open course dates.
Learn moreBecome a licensed glazier with the MSF30422 Certificate III in Glass and Glazing. This nationally recognised certificate qualifies you for work with either flat glass or stained glass and leadlights. The course covers: cutting glass by hand, glass cutting with machines, taking accurate measurements and calculations, communicating with supervisors and workmates, applying safe work methods, moving single sheets of glass, using computer-aided design (CAD) systems, applying patterns and designs to glass, laminating and toughening glass. Enquire now for entry requirements, glass trade outcomes, and course training providers in your area that offer this qualification.
Learn moreThe CPC30320 Certificate III in Concreting qualifies you for work as a professional concreter on either commercial or domestic properties. This nationally recognised training course delivers the foundational knowledge required for any career in trades (measurements, calculations, levelling, using tools, onsite safety) as well as specific concreting skills (placing, finishing, curing, and reinforcing concrete). Enquire now for the full list of study units, elective choices, and enrolment opportunities.
Learn moreThe CPC30920 Certificate III in Scaffolding is a trade qualification delivered under the supervision of a qualified scaffolder. It’s a nationally recognised course and you’ll graduate with a construction industry White Card, working at heights permit, and a scaffolding licence. The course covers: measurements and calculations, reading plans and specifications, erecting and dismantling scaffolding. You can also choose electives in welding, business administration, dogging, and loading crane operations.
Learn moreA CPC31420 Certificate III in Construction Waterproofing will provide you with the knowledge and skills you need to become a qualified waterproofer. You’ll learn how to perform various waterproofing tasks to prevent damage from water or damp on construction sites. This course will prepare you to work on both interior and exterior areas in the residential and commercial construction industry. The CPC31420 Certificate III in Construction Waterproofing looks at a range of topics relevant to this industry. Course delivery will vary depending on your provider, but you might cover subjects including handling waterproofing materials, applying sealant, using waterproofing tools and equipment and preparing surfaces for waterproofing application. Enquire now for a full list of study units, entry requirements and start dates.
Learn moreEntry requirements
Entry requirements set by ASQA are the basic qualifications and criteria that students must meet before enrolling in a nationally recognised course.
These requirements ensure students have the skills and knowledge needed to undertake this course.
- There are no formal academic requirements
- Additional entry requirements are set by individual course providers
Career opportunities
The Certificate II in Cabinet Making and Timber Technology will prepare you for the following roles.
Apprentice Cabinet Maker
An Apprentice Cabinet Maker builds and installs products such as kitchen and bathroom cabinets. You’ll work with clients to design pieces and work...
Apprentice Furniture Maker
An Apprentice Furniture Maker builds a range of furniture pieces for clients. You’ll use materials including timber and synthetic products and also...
Apprentice Joiner
An Apprentice Joiner creates timber components used for a range of purposes, including doors, window frames, staircases and other parts. You might...
More about Certificate II in Cabinet Making and Timber Technology
If you are considering a career in woodworking, the Certificate II in Cabinet Making and Timber Technology in Windsor is an excellent starting point. This course prepares you for various skilled roles in the trades industry, aligning with the growing demand for quality craftsmanship and woodworking skills. By complementing your hands-on training with theoretical knowledge, you will be in a prime position to succeed in this exciting field.
Windsor, located in 3181 Australia, is home to several reputable Registered Training Organisations (RTOs) that offer the Certificate II in Cabinet Making and Timber Technology. Participating in this course allows you to gain essential skills in cabinet making, including understanding materials, using tools safely, and creating custom furniture pieces. The hands-on experience you will receive enables you to rapidly develop your abilities, making you an attractive candidate for future employers.
Upon completing the course, you will find yourself well-equipped to pursue various career paths, including being an Apprentice Carpenter, Apprentice Joiner, Apprentice Cabinet Maker, or Apprentice Furniture Maker. These roles are crucial for anyone looking to establish a rewarding and stable career in woodworking and carpentry, especially within the Windsor region where industry opportunities continue to thrive.
The skills gained through the Certificate II in Cabinet Making and Timber Technology are not only applicable in traditional settings but also in contemporary design environments. As local businesses increasingly seek skilled professionals, your qualification will enable you to meet the current market demands and excel in your chosen trade. Standing out in a competitive field is essential, and having this qualification can significantly enhance your employability in Windsor.
Take a bold step toward your future in woodworking by enrolling in the Certificate II in Cabinet Making and Timber Technology course today. With dedicated training providers located in Windsor, you can access high-quality education tailored to meet your career aspirations. Make the most of your potential and join the trades industry where your talents for cabinet making and timber technology can flourish.
